Message: Dump memory size exceeds dump file size.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates that the dump memory size has exceeded the dump file size.
Recommended Action: Execute the copy support command and reload the switch. If the problem persists, contact your switch service provider.
Message:Concurrent trace dumping.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the initial background dump has not completed.
Recommended Action: No action is required.
Message: Cannot open ATA dump device.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that the advanced technology attachment (ATA) dump driver is not initialized properly.
Recommended Action: Execute the copy support command and reload the switch. If the problem persists, contact your switch service provider.
Message: Cannot write to ATA dump device.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that the write boundary in the advanced technology attachment (ATA) dump device has been exceeded.
Recommended Action: Execute the copy support command and reload the switch. If the problem persists, contact your switch service provider.
Message: Trace initialization failed. <Reason initialization failed>. <Internal error code>.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that trace was unable to initialize.
Recommended Action: Execute the copy support command and reload the switch. If the problem persists, contact your switch service provider.