RPS Messages

RPS-1001

Message: Failed to allocate memory: (<function name>).

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that the specified function has failed to allocate memory.

Recommended Action: Check the memory usage on the switch using the show process memory command.

Reload or power cycle the switch.

RPS-1750

Message:Route Map <Route_map_name> is bound on interface <interface_name>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the specified route map has been applied to the specified interface.

Recommended Action: No action is required.

RPS-1751

Message: Route Map <Route_map_name> binding on interface <interface_name> failed.

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that the specified route map was not instantiated on the specified interface.

Recommended Action: No action is required.

RPS-1752

Message: Route Map <Route_map_name> is unbound from interface <interface_name>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the specified route map has been removed from the specified interface.

Recommended Action: No action is required.

RPS-1753

Message: Route Map <Route_map_name> unbinding from interface <interface_name> failed.

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that the specified route map was not removed from the specified interface.

Recommended Action: No action is required.

RPS-1754

Message: Route Map <Route_map_name> stanza sequence number <Stanza_sequence_number> binding to interface <interface_name> failed.

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that a newly created stanza on an already active route map was unable to be instantiated.

Recommended Action: No action is required.