Message:Linux socket error - error reason: <reason>, socket name: <sockname>, error name<errorname>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an error has occurred in the Linux socket.
Recommended Action: Reload or power cycle the switch.
Message: Initialization error : <reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the Layer 2 Agent (L2AGT) has encountered an error during initialization.
Recommended Action: Reload or power cycle the switch.
Message: Message Queue Error : Message queue create failed.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the Layer 2 Agent (L2AGT) has encountered system service manager (SSM) message queue errors.
Recommended Action: Reload or power cycle the switch.
Message: FDB error: Error in creating AVL tree.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the Layer 2 Agent (L2AGT) has encountered an error while initializing the AVL tree.
Recommended Action: Reload or power cycle the switch.
Message: MAC-address-table hash failed even after two attempts for slot <slot> chip <chip>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the media access control (MAC) address table hash failed even after two hash changes on the specified chip.
Recommended Action: Reload or power cycle the switch.
Message: MAC-address-table on slot <Slot_id> chip <Chip_id> is 95 percent full.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended Action: Clear some of the entries using the clear mac-address-table dynamic command or wait until the old entries age out.
Message: MAC-address-table on slot <Slot_id> chip <Chip_id> is less than 90 percent full.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the media access control (MAC) address table is less than 90 percent full.
Recommended Action: No action is required. The Layer 2 Agent (L2AGT) will start learning the entries.
Message: MAC-address-table on slot <Slot_id> chip <Chip_id> is 95 percent full [Dynamic/Static MAC's: <fdb_count>; ACL MAC's: <Acl_count>].
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended Action: Clear some of the entries using the clear mac-address-table dynamic command or wait until the old entries age out.
Message: L2 H/W tables have reached capacity. Few ACL/MAC entries may not be configured in H/W, resulting in flooding.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that some of the Layer 2 hardware tables are full.
Recommended Action: Clear some of the entries using the clear mac-address-table dynamic command or wait until the old entries age out.
Message: ERROR: Mac Vlan Classification table is Full. Add Failed for Vlan <ivid> Mac <mac1>:<mac2>:<mac3>:<mac4>:<mac5>:<mac6> on <ifname>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Layer 2 classifier hardware table is full.
Recommended Action: Remove the existing MAC VLAN entries and reconfigure.
Message: Mgr-Agt Checksum Mismatch reached the threshold for Slot:<slot-id>. Requesting the MAC Refresh from L2 Manager.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the MAC entries may be out of synchronization between the Layer 2 Manager and the Layer 2 Agent.
Recommended Action: No action is required.