Message:Socket Error: <op> (<reason>) for socket <sockname> the error code<errorname>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an error has occurred in the Linux socket.
Recommended Action: Reload or power cycle the switch.
Message: Socket Error: <op> sock name <sock> Error <error> type <type> seq <seq> pid <pid>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the specified error has occurred while processing the hardware abstraction layer (HAL) message.
Recommended Action: Reload or power cycle the switch.
Message: Learning error: <op> (<reason>) - VLAN <vid> MAC/group <address>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered an error while learning the media access control (MAC) addresses.
Recommended Action: Reload or power cycle the switch.
Message: NSM error: <op> (<reason>) for VLAN <vid> port <port>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered an error during a network service module (NSM) event.
Recommended Action: Reload or power cycle the switch.
Message: Message error: Invalid message type <type> expecting <value1> or <value2> or <value3>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the type of the message received from the driver is invalid
Recommended Action: Reload or power cycle the switch.
Message: Message error: <op> (<reason>)Invalid message length <length> expecting <length1>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the length of the message received from the driver is invalid.
Recommended Action: Reload or power cycle the switch.
Message: Initialization error: <op> (<reason>).
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered an error during initialization.
Recommended Action: Reload or power cycle the switch.
Message: HAL error: <op> (<reason>) - VLAN <vid> MAC/group <address>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered the hardware abstraction layer (HAL) errors.
Recommended Action: Reload or power cycle the switch.
Message: L2SS error: <op> (<reason>) VLAN <vid> MAC <mac address>.
Message Type: DCE
Severity: ERROR
Probable Cause:Indicates that the multicast subsystem (mcast_ss) has encountered the Layer 2 subsystem (L2SS) related errors.
Recommended Action: Reload or power cycle the switch.
Message: Message Queue error: <op> (<reason>) TYPE <type>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered the message queue errors.
Recommended Action: Reload or power cycle the switch.
Message: IDB error: <op> (<reason>) port index <port-index> not found for VLAN ID <vlan-id>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the specified port index is invalid.
Recommended Action: If there is an impact on the data path, reload or power cycle the switch. Refer to the Network OS Administrator's Guide for instructions to verify the data path.
Message: IDB error: <op> (<reason>) VLAN ID <vid> not found.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the specified VLAN ID (VID) is invalid.
Recommended Action: If there is an impact on the data path, reload or power cycle the switch. Refer to the Network OS Administrator's Guide for instructions to verify the data path.
Message: Snooping DB error: <op> (<reason>) Group not found - VLAN <vid> group <group address>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the group address lookup for the specified VLAN has failed.
Recommended Action: Reload or power cycle the switch.
Message: Snooping DB error: <op> (<reason>) MAC not found - VLAN <vid> MAC-addr <MAC address>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the media access control (MAC) address lookup for the specified VLAN has failed.
Recommended Action: Reload or power cycle the switch.
Message: HSL error: <op> (<reason>) failed for message <message> VLAN <vid> MAC <MAC address> mgid <mgid> CPU <cpu>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the specified hardware subsystem layer (HSL) related operation has failed.
Recommended Action: Reload or power cycle the switch.
Message: Message error: <op> (<reason>) <length> (<length1>).
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the length of the message received from the driver is invalid.
Recommended Action: Reload or power cycle the switch.
Message: Learning error: <op> (<reason>) Invalid number <port> for ifindex <ifindex>.
Message Type: DCE
Severity: ERROR
Probable Cause:Indicates that the multicast subsystem (mcast_ss) has encountered an error while learning the media access control (MAC) addresses.
Recommended Action: Reload or power cycle the switch.
Message: Memory Alloc Error: <op> (<reason>) type <memtype>/<memsize>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered an error during the memory allocation.
Recommended Action: Reload or power cycle the switch.
Message: Ptree Error: <op> (<reason>) VLAN <vid> MAC/group <address>.
Message Type: DCE
Severity: ERROR
Probable Cause:Indicates that the multicast subsystem (mcast_ss) has encountered an error during the Ptree operation.
Recommended Action: Reload or power cycle the switch.
Message: List Error: <op> (<reason>) VLAN <vid> MAC <mac address> group <group address>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the multicast subsystem (mcast_ss) has encountered an error during the List operation.
Recommended Action: Reload or power cycle the switch.