Message:SNMP service is not available <Reason>.
Message Type: LOG
Severity: ERROR
Probable Cause:
Indicates that the Simple Network Management Protocol (SNMP) service could not be started because of the specified reason. You will not be able to query the switch through SNMP.
Recommended Action: Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly using the show interface management command. If the specified reason is an initialization failure, reload the switch.
Message: SNMP <Error Details> initialization failed.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that the initialization of the Simple Network Management Protocol (SNMP) service failed and you will not be able to query the switch through SNMP.
Recommended Action: Reload or power cycle the switch. This will automatically initialize SNMP.
Message: Distribution of Community Strings to Secure Fabric failed.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that the changes in the Simple Network Management Protocol (SNMP) community strings could not be propagated to other switches in the secure fabric.
Recommended Action: Retry changing the SNMP community strings on the primary switch using the snmp-server community command.
Message: Incorrect SNMP configuration.
Message Type: FFDC | LOG | AUDIT
Severity: ERROR
Probable Cause: Indicates that the Simple Network Management Protocol (SNMP) configuration is incorrect and the SNMP service will not work correctly.
Recommended Action: Change the SNMP configuration using the config snmp-server command.
Message: SNMP configuration attribute, <Changed attribute>, <String Value>.
Message Type: LOG | AUDIT
Class: CFG
Severity: INFO
Probable Cause: Indicates that the Simple Network Management Protocol (SNMP) configuration has changed. The parameter that was modified is displayed along with the old and new values of that parameter.
Recommended Action: Execute the show running-config snmp-server command to view the new SNMP configuration.