Message: Previous message has repeated <repeat count> times.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the previous message was repeated the specified number of times.
Recommended Action: No action is required.
Message:A log message was dropped.
Message Type: LOG | FFDC
Severity: WARNING
Probable Cause: Indicates that a log message was dropped. A trace dump file has been created.
Recommended Action: Execute the copy support command and contact your switch service provider.
Message: A log message was not recorded.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates that a log message was not recorded by the error logging system. A trace dump file has been created.
The message may still be visible through Simple Network Management Protocol (SNMP) or other management tools.
Recommended Action: Execute the copy support command and contact your switch service provider.
Message: SYSTEM error log has been cleared.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the persistent system error log has been cleared.
Recommended Action: No action is required.
Message: Log message <Log message that has been blocked> flooding detected and blocked.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates that the specified message has been flooding and was blocked.
Recommended Action:Reload the switch. If the message persists, execute the copy support command and contact your switch service provider.
Message: Log message <Log message that has been disabled> has been disabled.
Message Type: AUDIT | LOG
Class: RAS
Severity: INFO
Probable Cause: Indicates that the specified message has been disabled from logging.
Recommended Action: No action is required.
Message: Log message <Log message that has been enabled> has been enabled.
Message Type:AUDIT | LOG
Class: RAS
Severity: INFO
Probable Cause: Indicates that the specified message has been enabled for logging.
Recommended Action: No action is required.
Message: DCE error log has been cleared.
Message Type:DCE
Severity: INFO
Probable Cause:Indicates that the persistent DCE error log has been cleared.
Recommended Action: No action is required.
Message: Log Module <Log Module that has been disabled> has been disabled.
Message Type:AUDIT | LOG
Class: RAS
Severity: INFO
Probable Cause: Indicates that the specified module has been disabled from logging.
Recommended Action: No action is required.
Message: Log Module <Log Module that has been enabled> has been enabled.
Message Type:AUDIT | LOG
Class: RAS
Severity: INFO
Probable Cause: Indicates that the specified module has been enabled for logging.
Recommended Action: No action is required.
Message: Internal Log message <Log message that has been enabled to be sent to syslog server> has been enabled for syslog logging.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the specified message has been enabled for syslog logging.
Recommended Action: No action is required.
Message: Internal Log message <Log message that has been disabled from being sent to syslog server> has been disabled from syslog logging.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the specified message has been disabled from syslog logging.
Recommended Action: No action is required.
Message: Log Message <Log Message Id> severity has been changed to <Severity>.
Message Type: AUDIT | LOG
Class: RAS
Severity: INFO
Probable Cause: Indicates that the severity level of the specified log message has been changed.
Recommended Action: No action is required.