Commands for displaying, clearing, and configuring the message logs

The following table describes commands that you can use to view or configure various message logs. Most commands require the admin access level. For detailed information on required access levels and commands, refer to Extreme SLX-OS Command Reference.

Table 1. Commands for viewing and configuring the message logs
Command	Description
clear logging auditlog	Clears the AUDiT log messages from the local switch or the specific switches.
clear logging raslog	Sets a filter that is based on the severity level for the messages to be displayed on the system console.
logging auditlog class	Sets the event classes for AUDIT log messages.
logging raslog console	Sets a filter that is based on the severity level for the messages to be displayed on the system console.
logging syslog-facility local	Sets the syslog facility.
logging syslog-server	Configures a syslog server to which the switch can forward the messages.
format RFC-5424	Configures a syslog server to RFC-5424 format. This command is a logging syslog-server subcommand
show logging auditlog	Displays the AUDIT log messages on the local switch or the specific switches. Note: This command can be disruptive because it displays all the logs in the buffer continuously. Use \| more to see output page by page.
show logging raslog	Displays the error log message on the local switch, the specific switch, or interface module. The command includes options to filter the messages that are based on the message attribute and severity level, and also to set the count of messages to display, and to display messages in reverse order. Note: This command can be disruptive because it displays all the logs in the buffer continuously. Use \| more to see output page by page.
show running-config logging	Displays the logging settings on the local switch.
show running-config logging auditlog class	Displays the event class that is configured for the AUDIT log.
show running-config logging raslog	Displays the RASLog console severity level on the local switch or the specific switch.
show running-config logging syslog-facility	Displays the syslog facility level.