Preface
About This Guide
- Who Should Use This Guide
- How to Use This Guide
Backing Up and Restoring the Image
Backing Up and Restoring the Configuration
Upgrading the Wireless Convergence Software
Working with External Storage Devices
Using the Console Port
- Using the Console Port in the Wireless Controller
  - Entering Rescue Mode on the Wireless Controller C25, C4110, and C5110
  - Entering Rescue Mode on the Wireless Controller C35, C5210, and C5215
- Using the Console Port for the V2110
Performing System Maintenance
Using Controller Utilities
- Using Controller Utilities
  - Capturing Exception Traffic
- Enabling SNMP
  - MIB Support
    - NetSight Suite Integration
  - Enabling SNMPv1/v2c on the Wireless Controller
Recovering the Wireless Controller
- Rescue Mode Authentication Service Management Menu
- Recovering the Wireless Controller from File System Corruption
Maintaining the Wireless Controller
Maintaining the Wireless AP Software
Performing Wireless AP Diagnostics

Manually Moving APs Back to Local Controller

Manually move AP-3 and AP-4 from Controller 1 to Controller 2, where they were configured as ‘Local‘ APs. After you manually move the APs, the network is back to its original configuration with each controller running two APs.

Published April 2018prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback