Enabling AP Log Management

1. From the top menu, click Controller.
2. From the left pane, click Logs > AP Log Management > AP Log Collection .
   

   
3. To specify which APs will be included, do one of the following:
   • Search for a specific AP by entering the AP in the search bar and clicking ().
   • For a specific AP, select the corresponding check box.
   • For APs by category, click one of the Select APs options:
     • “---” option - Selected APs will be cleared from the AP Logs search.
     • Local APs - Select active or inactive local configured APs.
     • Foreign APs - Select active or inactive foreign configured APs.
4. To clear your AP selections, click Deselect All.
5. To set the frequency of the collection, under Times Per Day, select 1 (default), 2, 4, or 6 times per day.
6. To set the destination of the AP logs, under Destination, select Local, Flash, or Remote.
7. Click Save.