View Primary IP Addresses for all Router Interfaces

Perform the following procedure to display information about all primary IP interfaces configured on the device.

About this task

This command displays only primary IP interfaces. To view Secondary IP Interfaces, see Display All Configured IP Addresses.

Procedure

Enter Privileged EXEC mode:

enable
Show the IP interfaces and addresses on the device:

show ip interface

Example

Show the primary IP interfaces and addresses on the device:

Switch:1>show ip interface
==========================================================================================
                          IP Interface - GlobalRouter
==========================================================================================
INTERFACE  IP            NET            ADMIN     OPER    VLAN  BROUTER   IPSEC   IP      
           ADDRESS       MASK           STATUS    STATE   ID    PORT      STATE   NAME    
------------------------------------------------------------------------------------------
Port1/2    192.0.2.1     255.255.255.0  enable    up      20    true      disable         
Vlan10     198.51.100.0  255.255.255.0  disable   down    10    false     disable         

All 2 out of 2 Total Num of IP interfaces displayed

Variable Definitions

Use the data in the following table to show ip interface command.


Variable	Value
gigabitethernet	Displays IP interface information for Gigabit Ethernet ports.
vrf	Displays interface information for a particular VRF.
vrfids	Displays interface information for particular VRF IDs.