Configure an ACE IP protocol
Configure ACE IP protocol entries to have the filter look for packets of specific protocols.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation tree, expand the following folders: .
- Select Advanced Filters (ACE/ACLs).
- Select the ACL tab.
- Select the appropriate ACL.
- Select ACE.
- Select the appropriate ACE.
- Select IP.
- Select the Protocol tab.
- Select Insert.
- Specify the operation type.
- In the List box, enter the IP protocol type.
- Select Insert.
Protocol field descriptions
Use the data in the following table to use the Protocol tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. |
|
AceId |
Specifies the ACE ID. |
|
Oper |
The eq parameter specifies an operator for a field match condition: equal to. |
|
List |
Specifies the IP protocol type. Entries include 0–256, undefined, tcp, udp, ipsecesp, vrrp, and undefined. |