|
Feature |
Product |
Release introduced |
|---|---|---|
|
Time Domain Reflectometer |
5320 Series |
Not Supported |
|
5420 Series |
Fabric Engine 8.10 Switch models: 5420F-24T-4XE 5420F-24P-4XE 5420F-48T-4XE 5420F-48P-4XE 5420F-48P-4XL 5420F-8W-16P-4XE 5420F-16W-32P-4XE 5420F-16MW-32P-4XE 5420M-24W-4YE 5420M-48W-4YE 5420M-24T-4YE 5420M-48T-4YE 5420M-16MW-32P-4YE |
|
|
5520 Series |
Not Supported |
|
|
5720 Series |
Not Supported |
|
|
7520 Series |
Not Supported |
|
|
7720 Series |
Not Supported |
|
|
VSP 4900 Series |
Not Supported |
|
|
VSP 7400 Series |
Not Supported |
With Time Domain Reflectometer (TDR) cable diagnostic, you can test Ethernet cables connected to a switch port or ports for defects. The cable diagnostic detects the state of the port or ports, the status of the cable pairs, and the length of the cable.
Note
You can perform TDR cable diagnostic on copper ports.
The following table lists the states of the cables connected to a port or ports.
| State | Description |
|---|---|
|
Ok |
No cable fault is detected. |
|
Open |
Detects lack of continuity between the pins at each end of the cable. |
|
Short |
Detects a short circuit in the cable. |
|
Open/Short |
Detects either a short circuit on the cable or a lack of continuity between the pins at each end of the cable. |
|
Crosstalk |
Detects interference and degradation between two pairs in the cable. |
|
Unknown |
Detects an unknown issue. |