Enable Fast PoE on a Port

About this task

Perform this procedure to enable Fast PoE on a specific copper port of the switch. After you enable Fast PoE, you must save the running configuration file.

Procedure

Enter GigabitEthernet Interface Configuration mode:

enable

configure terminal

interface GigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
Enable Fast PoE on the copper port:

poe fast-poe-enable [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
Save the configuration file:

save config

Variable Definitions

The following table defines parameters for the fast-poe-enable command.


Variable	Value
port `{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}`	Specifies the port or ports to be configured.