Configure Global NTP
Use this procedure to configure the DHCP Server Global NTP tab in
EDM.
Procedure
- In the navigation pane, select .
- Select the Global NTP tab.
- In the IP Address field, enter the IPv4 address of the NTP server.
- Select Insert.
- Repeat these steps if you want to add additional servers.
Global NTP Field Descriptions
Use the data in the following table to configure the Global NTP tab for DHCP Server.
Name | Description |
---|---|
IP Address | Specifies the IPv4 address of the NTP server. You can enter a maximum of eight DNS servers. |