Show the EAPoL Status of the Device

Display the current device configuration.

Note

Use the clear-stats command to clear EAP or NEAP statistics.

1. To enter User EXEC mode, log on to the switch.
2. Display the current device configuration by using the following command:

   show eapol system

Example

Switch:1>show eapol system
=================================================================
                                  Eapol System
=================================================================
                     eap : disabled
           Eapol Version : 3
         non-eap-pwd-fmt : mac-addr
     non-eap-pwd-fmt key : ******
 non-eap-pwd-fmt padding : disabled
 auto-isid-offset status : disabled
 auto-isid-offset value  : 1000