Viewing ACL Statistics

About this task

Graph statistics for a specific ACL ID to view default statistics.

Procedure

  1. In the navigation pane, expand the Configuration > Security > Data Path folders.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select an ACL.
  5. Click Graph.
  6. You can click Clear Counters to clear the Statistics fields.

Statistics Field Descriptions

Use the data in the following table to use the Statistics tab.

Note

Note

Based on your hardware platform, the output can display the ACL packets by ACE type or Primary Bank or Secondary Bank.

Name

Description

AclId

Specifies the ACL ID.

MatchDefaultPrimaryBankPkts

Shows a Primary Bank packet count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchDefaultPrimaryBankOctets

Shows a Primary Bank byte count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchDefaultSecondaryBankPkts

Shows a Secondary Bank packet count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchDefaultSecondaryBankOctets

Shows a Secondary Bank byte count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalPrimaryBankPkts

Shows a Primary Bank packet count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalPrimaryBankOctets

Shows a Primary Bank byte count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalSecondaryBankPkts

Shows a Secondary Bank packet count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalSecondaryBankOctets

Shows a Secondary Bank byte count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

DefaultGreenBytes

Shows byte count of traffic sent with a rate lower than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultGreenPackets

Shows packet count of traffic sent with a rate lower than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultYellowBytes

Shows byte count of traffic sent with a rate lower than peak-rate and higher than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultYellowPackets

Shows packet count of traffic sent with a rate lower than peak-rate and higher than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultRedBytes

Shows byte count of traffic sent with a rate higher than peak-rate matching any of the ACE rules or hits on Default Action.

DefaultRedPackets

Shows packet count of traffic sent with a rate higher than peak-rate matching any of the ACE rules or hits on Default Action.