View RSMLT Information
Show RSMLT information to view data about all RSMLT interfaces. The output of the command includes IPv6 information for the local and peer nodes.
About this task
If you use the show ip rsmlt command after you delete an RSMLT, the RSMLT still shows in the command output until you restart the switch.
Procedure
Examples
Switch:1>show ip rsmlt
================================================================================
Ip Rsmlt Local Info - GlobalRouter
================================================================================
VID IP MAC ADMIN OPER HDTMR HUTMR
--------------------------------------------------------------------------------
101 101.1.1.32 00:24:7f:9e:da:01 Enable Up 100 200
102 102.1.1.32 00:24:7f:9e:da:02 Enable Up 60 180
VID SMLT ID
--------------------------------------------------------------------------------
101 101
102 102
VID IPv6 MAC ADMIN OPER HDTMR HUTMR
--------------------------------------------------------------------------------
101 00:24:7f:9e:da:01 Enable Up 100 200
1010:0:0:0:0:0:0:0/64
1010:0:0:0:0:0:0:32/64
fe80:0:0:0:224:7fff:fe9e:da01/128
102 00:24:7f:9e:da:02 Enable Up 60 180
1020:0:0:0:0:0:0:0/64
1020:0:0:0:0:0:0:32/64
fe80:0:0:0:224:7fff:fe9e:da02/128
VID SMLT ID
--------------------------------------------------------------------------------
101 101
102 102
================================================================================
Ip Rsmlt Peer Info - GlobalRouter
================================================================================
VID IP MAC ADMIN OPER HDTMR HUTMR
--------------------------------------------------------------------------------
101 101.1.1.33 00:24:7f:9e:ea:01 Enable Up 100 200
102 102.1.1.33 00:24:7f:9e:ea:00 Enable Up 60 180
VID HDT REMAIN HUT REMAIN SMLT ID
--------------------------------------------------------------------------------
101 60 180 101
102 60 180 102
VID IPv6 MAC ADMIN OPER HDTMR HUTMR
--------------------------------------------------------------------------------
101 00:24:7f:9e:ea:01 Enable Up 100 200
1010:0:0:0:0:0:0:0/64
1010:0:0:0:0:0:0:33/64
fe80:0:0:0:224:7fff:fe9e:ea01/128
102 00:24:7f:9e:ea:00 Enable Up 60 180
1020:0:0:0:0:0:0:0/64
1020:0:0:0:0:0:0:33/64
fe80:0:0:0:224:7fff:fe9e:ea00/128
VID HDT REMAIN HUT REMAIN SMLT ID
--------------------------------------------------------------------------------
101 60 180 101
102 60 180 102
Switch:1>show ip rsmlt edge-support
RSMLT Peer Info:
rsmlt-peer-forwarding : disable
Variable definitions
Use the data in the following table to use the show ip rsmlt command.
|
Variable |
Value |
|---|---|
|
local |
Shows local RSMLT information. |
|
peer |
Shows RSMLT information for the peer. |
|
vrf WORD<1-16> |
Shows information for a specific VRF name. |
|
vrfids WORD<0-512> |
Shows information for a specific VRF ID. |