Add a Secondary Virtual IP for VRRPv2
The first virtual IP configured on a VRRP interface is the primary virtual IP. After you create a VRRP interface, you can create secondary virtual IPs.
Before you begin
-
Create primary and secondary IP addresses on the VLAN.
-
Create a VRRP instance on the VLAN.
-
Configure a primary virtual IP.
About this task
Secondary virtual IP addresses must be in the same subnet as a Secondary IP Interface on the VLAN.
Procedure
- In the navigation pane, expand .
- Select VRRP.
- Select the Interface tab.
- Select an interface, and then select AssociatedIPAddr.
- On the Address List tab, select Insert.
- Type the IP address.
- Select Insert.
Address List Field Descriptions
Use the data in the following table to use the Address List tab.
| Name | Description |
|---|---|
|
IpAddr |
Specifies a secondary virtual IP address. |