Viewing BGPv6 neighbors information

View information about BGPv6 neighbors.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. View information about BGPv6 neighbors:

    show bgp ipv6 neighbors [WORD<1–256>] [vrf <WORD 1-16>] [vrfids <0-255>]

  3. View information about BGPv6 peer advertised routes:

    show bgp ipv6 neighbors WORD<1–256> advertised-routes [WORD<1–256>] [longer-prefixes] [vrf <WORD 1-16>] [vrfids <0-255>]

  4. View information about BGPv6 peer routes:

    show bgp ipv6 neighbors WORD<1–256> routes [WORD<1–256>] [community <enable|disable>] [vrf <WORD 1-16>] [vrfids <0-255>]

Example

The following examples shows the summary output for bgp ipv6 neighbors command, and the advertised-routes and routes variable options.

Switch:1>show bgp ipv6 neighbors vrf vrf1

=====================================================================================
                       BGPv6 Neighbor Info - VRF vrf1
=====================================================================================
BGPv6 neighbor is 2015:cdba:0:0:0:0:3257:9652 remote AS 200, External Peer,
BGP state [Established] UP Time 0 day(s), 00:50:30
remote router ID 0.0.0.6

	                            vrf instance - 0
	                             admin-state - BGP ON
	                  connect-retry-interval - 120
	                           ebgp-multihop - disable
	                               hold-time - 180
	                          keepalive-time - 60
	                    hold-time-configured - 180
	               keepalive-time-configured - 60
	                         ipv6-max-prefix - 8000
	                            nexthop-self - disable
	                   originate-defv6-route - disable
	                          neighbor-debug - all
	                       remove-private-as - disable

                    route-advertisement-interval - 5
	                  route-reflector-client - disable
	                          send-community - disable
			   soft-reconfiguration-in - enable
	                   updt-source-interface - 0:0:0:0:0:0:0:0
	                                  weight - 100
                            IPv6Route Policy In -
                           IPv6Route Policy Out -
	                     address-family ipv6 - enable
	                           route-refresh - enable       


Total bgpv6 neighbors: 1           
Switch:1>show bgp ipv6 neighbors 2015:cdba:0:0:0:0:3257:9655 advertised-routes vrf vrf1
										-------------------------------------------------------------------------

The total number of routes advertised to the neighbor is 2
=================================================================================================
                                  BGPv6 Neighbor Advertised Routes - VRF vrf1
=================================================================================================
NETWORK/MASK                  NEXTHOP ADDRESS                               LOC PREF ORG   STATUS
-------------------------------------------------------------------------------------------------
2001:cdba:0:0:0:0:0:0/64      2001:cdba:0:0:0:0:3257:9651                   100      INC   Best
2007:cdba:0:0:0:0:0:0/64      2001:cdba:0:0:0:0:3257:9651                   100      INC   Used
-------------------------------------------------------------------------------------------------

Switch:1>show bgp ipv6 neighbors 2015:cdba:0:0:0:0:3257:9655 routes vrf vrf1
-------------------------------------------------------------------------------------------------
The total number of accepted routes from the neighbor is 2
=================================================================================================
                                  BGPv6 Neighbor Routes - VRF vrf1
=================================================================================================
NETWORK/MASK          PEER-REM-ADDR               NEXTHOP-ADDRESS             ORG LOC-PREF STATUS
 
-------------------------------------------------------------------------------------------------
1100:0:0:0:0:0:0:0/64    2015:cdba:0:0:0:0:3257:9655 2015:cdba:0:0:0:0:3257:9655 INC 100 Used AS_PATH:(150)
2015:cdba:0:0:0:0:0:0/64 2015:cdba:0:0:0:0:3257:9655 2015:cdba:0:0:0:0:3257:9655 INC 100 Best AS_PATH:(150)
-------------------------------------------------------------------------------------------------

Variable Definitions

The following table defines parameters for the show bgp ipv6 neighbors command.

Variable

Value

WORD<1–256>

Specifies the IPv6 address.

advertised-routes

Specifies an IPv6 neighbors advertised routes.

routes

Specifies an IPv6 neighbors routes.

WORD<1–256>

Specifies an IPv6 address/length.

longer-prefixes

Shows long prefixes. The longer-prefixes indicate the mask length from any specified prefix to 128. For example, show from prefix :X::X:X/len to X:X::X:X/ 128.

community <enable|disable>

Enables or disables the display of community attributes.

vrf

Specifies a VRF instance by name (the string length ranges from 1–16 characters).

vrfids

Specifies a range of VRFs by ID number (the ID ranges from 0–255).
9037809-00 Rev AB