Cluster Client reconciliation is supported only in SLX-OS releases earlier than SLX 20.1.1.
|
Configuration |
Details |
|---|---|
|
EFA Intended Config |
cluster nonclos-cluster-1 peer 10.20.20.7 peer-interface Port-channel 64 peer-keepalive auto ! member vlan all member bridge-domain all |
|
Switch Current Config |
Cluster missing Or cluster default-cluster-2 2 |
|
Action |
Display validation error This is an unexpected behavior as Fabric Service must have already reconciled this entity. |
|
Configuration |
Details |
|---|---|
|
EFA Intended Config |
cluster nonclos-cluster-1 peer 10.20.20.7 peer-interface Port-channel 64 peer-keepalive auto ! member vlan all member bridge-domain all |
|
Switch Current Config |
Empty |
|
Action |
Conflict Config, Replace Client Config (Verify) |
|
Configuration |
Details |
|---|---|
|
EFA Intended Config |
cluster nonclos-cluster-1 peer 10.20.20.7 peer-interface Port-channel 64 peer-keepalive auto ! member vlan all member bridge-domain all |
|
Switch Current Config |
cluster default-cluster-1 1 peer-interface Port-channel 64 peer 10.20.20.4 df-load-balance deploy client default-cluster-1 1 client-interface Port-channel 2 Esi auto lacp deploy ! ! |
|
Action |
Conflict Config, Replace Client Config (Verify) |