Add a Static Route

Static Routes define the default route to ExtremeCloud IQ Controller for legitimate wireless traffic. You must be a system administrator to add a static route.
Note

Note

Static Routes affect the settings for the Default Gateway IP address under Host Attributes. Adding a default static route (0.0.0.0/0) changes the Default Gateway IP address.

To add a static route, take the following steps:

  1. Go to Administration > System.
  2. Under Static Routes select Add.
    The Create New Static Route dialog displays.
  3. Configure the following parameters:
    Table 1. Static Route Parameters
    FieldDescription
    DestinationIP address of the destination ExtremeCloud IQ Controller.
    CIDR CIDR field is used along with IP address field to find the IP address range.
    GatewayGateway address of the ExtremeCloud IQ Controller for any Admin or physical interfaces (B@AC L3 VLAN).
9039160-00 Rev. AA