ExtremeGuest Essentials Network Configuration

Go to Configure > Networks > WLANs.
Select Add.
Select Enable Captive Portal.
Set Captive Portal Type to Guest Essentials.
ExtremeGuest Essentials Configuration
Note
- This feature requires PILOT only licensing mode for all APs.
- HTTPS captive portal is not supported.
By default, only DNS, DHCP and access to Guest Essentials is allowed so you can define other Walled Garden Rules.
Go to Configure > Policy > Roles.
Select a role or select Add to create a new role.
Ensure the Name matches the Authorization Policy.

ExtremeGuest Essentials Configuration

Based on the onboarding policy, the value of the authorization policy is returned, and the client device assumes that role.

Note

SSID and Broadcast must be the same.
Cloning of WLAN is not supported.
VIQ Import/Export is not supported.
Set Authorization Policy to be lower than the rule timeout (recommended 5 minutes).
Wild cards in the rules are case sensitive. Must be “Any”
Notification policy SMS uses “[EXTR]” in the template to prevent being blocked by spam filters in some countries.
If changing templates for a network, delete the old one first.
To delete a Guest Network, work backwards: Delete the template first, the rule, then the SSID.

For setup and other documentation for ExtremeGuest Essentials, see Extreme Networks Product Documentation.