For APs that are configured for AFC, see AP Settings for AFC.
For an outdoor AP with external antennas, see External Antennas.
| Setting | Description |
|---|---|
| Floor Name | Determines the name of the floor. |
| Floor Height Above Ground | Floor height in meters from the ground. This measurement takes into account the floor height on each floor of a multi-floor building. |
| Floor Height Above Ground Uncertainty | Allowable measurement error for the Above Ground measurement. FCC requirement is to provide a height measurement with 95% confidence. |
| Floor Settings Override | Check this box to override the AP settings defined on the floor plan. |
| AP Height Above Floor | Floor height in meters from the floor. This is the height of a floor in a multi-floor building. |
| AP Height Above Floor Uncertainty | Allowable measurement error for the Above Floor measurement. FCC requirement is to provide a height measurement with 95% confidence. |
| Anchor AP | Indicates that the AP is an anchor AP. The AP5050 is the supported anchor AP. |
Note
Professional Install is offered on AP models with external antennas and on AP models that have internal selectable antennas. The AP must be a member of a valid device group.Note
Single-band antennas limit the AP operation to the radio that is associated with the antenna and reduce the sensor functionality of the IoT sensor radio.
