| Attribute Name | ID | Type | Messages | Description |
|---|---|---|---|---|
| AP-Name | 2 | string | Sent to RADIUS server | The name of the AP the client is associating to. It can be used to assign role based on AP name or location. |
| AP-Serial | 3 | string | Sent to RADIUS server | The AP serial number. It can be used instead of (or in addition to) the AP name. |
| AP Ethernet MAC | string | Sent to RADIUS server | The MAC address of the AP used by the ECP to determine client location. | |
| AP Location | string | Sent to RADIUS server | The physical location of the AP. Provided by the network administrator. | |
| VNS-Name | 4 | string | Sent to RADIUS server | The name of the Virtual Network the client has been assigned to. It is used in assigning role and billing options, based on service selection. |
| SSID | 5 | string | Sent to RADIUS server | The name of the SSID the client is associating to. It is used in assigning role and billing options, based on service selection. |
| BSS-MAC | 6 | string | Sent to RADIUS server | The name of the BSS-ID the client is associating to. It is used in assigning role and billing options, based on service selection and location. |
| Role-Name | 7 | string | Sent to RADIUS server | The name of the role applied to the station session. |
| Topology-Name | 8 | string | Sent to RADIUS server | The name of the topology applied to the station session. |
| Ingress-RC-Name | 9 | string | Sent to RADIUS server | The name of the rate limit applied to the station session outbound traffic. |
| Egress-RC-Name | 10 | string | Sent to RADIUS server | The name of the rate limit applied to the station session inbound traffic. |
| RSS | 11 | integer | Sent to RADIUS server | Received Signal Strength. RSS value in the RADIUS Accounting logs can identify areas that have a weak Wi-Fi signal. Use this information to increase coverage in problem areas. |