Schedule Report

Before you can schedule reports from ExtremeCloud IQ Controller:
Note

Note

When integrating Scheduler for ExtremeCloud IQ Controller, set Web Session Timeout > 2 hours. If this value is < 2 hours, Scheduler results in a 401 Unauthorized error. To configure Web Session Timeout, from ExtremeCloud IQ Controller, go to Administration > System > Maintenance.

Use Scheduler for ExtremeCloud IQ Controller to schedule reports from ExtremeCloud IQ Controller.

  1. Create a report template. For more information, see Create Report Template.
  2. From the Report Settings tab, select a report. Then, select Edit report settings.
  3. Provide the report settings and select Save Report Settings.
    For more information, see Run Report.
    Note

    Note

    Schedule reports from the Report Settings tab.

    You must save the report settings before you can schedule the report. When scheduling a report, the Period value is set from the Scheduler application.
  4. Select Scheduling.
    The Scheduler application opens.
  5. In the left pane, select Scheduler.
  6. From the calendar, select a time period.
    The Add Event dialog displays.
  7. In the Name field, provide a name for the event.
  8. From the Type field, select one of the following report types:
    • Historical Report. A scheduled report from ExtremeCloud IQ Controller. Valid duration:
      • 3 Hours
      • 3 Days
      • 14 Days
    • Aggregated Report. A scheduled report that offers a flexible duration (1-24 hours). Data is stored on ExtremeCloud IQ Controller and the report is generated after the duration period has expired. (Supported with ExtremeCloud IQ Controller v5.26.03 and later.)
      Note

      Note

      Only Venue reports are supported in the flexible duration Aggregated Report:
      • Usage by Type. Usage for uplink and downlink.
      • Throughput by Type. Throughput for uplink and downlink.
      • Throughput by Group. Throughput per defined user group.
      • Upload Usage by Group. Upload usage by defined user group.
      • Download Usage by Group. Download usage by defined user group.
      • Unique Users by Group. Number of unique users by defined user group.
      • Concurrent Users by Group. Number of simultaneous connections by defined user group.
      • Peak Upload Throughput
      • Peak Download Throughput
      • Uplink Usage
      • Downlink Usage
      • Total Unique Clients
      • Peak Unique Clients
  9. Configure Action — Select one or more reports to associate with the event.
    1. The available reports are listed under Available. The selected reports are listed under Selected.
    2. Drag and drop each report between the two panes. Select to move all reports at once.
    3. Select Save.

The event is displayed on the calendar at the designated time. The report is scheduled to run.

9039160-00 Rev. AA