ap7522

Adds an AP7522 to the network. If a profile for the AP is not available, a new profile is created.

Supported in the following platforms:

Access Point — AP7522, AP8432, AP8533
Wireless Controllers — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

ap7522 <MAC>

Parameters

ap7522 <MAC>


<MAC>	Specify the AP7522's MAC address.

Examples

NOC-NX9500(config)#ap7522 84-24-8D-83-30-A4
NOC-NX9500(config-device-84-24-8D-83-30-A4)#show context
ap7522 84-24-8D-83-30-A4
 use profile default-ap7522
 use rf-domain default
 hostname ap7522-8330A4
 mint mlcp vlan
 mint mlcp ip
 use radius-server-policy eap
 interface radio1
  rf-mode 2.4GHz-wlan
  wlan open_test bss 1 primary
 interface radio2
  rf-mode 5GHz-wlan
  wlan open_test bss 1 primary
NOC-NX9500(config-device-84-24-8D-83-30-A4)#

NOC-NX9500(config)#show wireless ap configured
------------------------------------------------------------------------------------------
 IDX       NAME              MAC             PROFILE       RF-DOMAIN       ADOPTED-BY
------------------------------------------------------------------------------------------
  1   ap7522-8330A4   84-24-8D-83-30-A4   default-ap7522   default     B4-C7-99-6C-88-09
  2   ap8163-74B45C   B4-C7-99-74-B4-5C   default-ap81xx   default     B4-C7-99-6C-88-09
------------------------------------------------------------------------------------------
NOC-NX9500(config)#

Related Commands


no (global-config-mode)	Removes an AP7522 from the network