radio-resource-measurement

Enables 802.11k radio resource measurement. When enabled, the radio station sends channel and neighbor reports.

The IEEE 802.11 Task Group k defined a set of specifications regarding radio resource measurements. These specifications specify the radio resources to be measured and the mechanism used to communicate measurement requests and results.

Supported in the following platforms:

Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533

Syntax

radio-resource-measurement [attenuation-threshold <1-199>|max-entries <1-12>]

Parameters

radio-resource-measurement [attenuation-threshold <1-199>|max-entries <1-12>]


radio-resource-measurement	Enables 802.11k radio resource measurement on the radio
attenuation-threshold <1-199>	Configures the neighbor attenuation threshold, considered when generating channel and neighbor reports <1-199> – Specify the attenuation threshold from 1 -199. The default is 90.
max-entries <1-12>	Configures the maximum number of entries to include in channel and neighbor reports <1-12> – Specify a value from 1 - 12. The default is 6.

Example

rfs4000-229D58(config-device-00-23-68-22-9D-58-if-radio1)#radio-resource-measurement attenuation-threshold 20

rfs4000-229D58(config-device-00-23-68-22-9D-58-if-radio1)#radio-resource-measurement max-entries 10

rfs4000-229D58(config-device-00-23-68-22-9D-58-if-radio1)#show context
 interface radio1
  radio-resource-measurement max-entries 10
  radio-resource-measurement attenuation-threshold 20
rfs4000-229D58(config-device-00-23-68-22-9D-58-if-radio1)#

Related Commands


no (radio-interface-config-command)	Disables 802.11k radio resource measurement support