server (iot-device-type-imagotag-policy)

Configures the ESL SES-Imagotag server‘s IP address or hostname. As per the current implementation, at the ESL server end, the WiNG AP‘s IP address was configured to enable the server contact the AP and establish connection with the ESL communicator (USB Dongle). Starting with WiNG 5.9.3, the WiNG AP will send a connection request to the ESL server. For this purpose, the ESL Imagotag server‘s IP address or hostname has to be configured in the IOT Imagotag policy. Use this command to provide the SES-Imagotag server‘s IP address or hostname.

Supported in the following platforms:

Syntax

server [hostname|ip-address]
server [hostname <HOST-NAME>|ip-address [<IP>|<HOST-ALIAS-NAME>]] {port <1-65535>}

Parameters

server [hostname <HOST-NAME>|ip-address [<IP>|<HOST-ALIAS-NAME>]] {port <1-65535>}

server

Configures the ESL server‘s hostname or IP address

hostname <HOST-NAME>

Use this option to configure the ESL server‘s hostname.

  • <HOSTNAME> – Provide the hostname (could be FQDN, partial DN, etc.)

ip-address [<IP>|<HOST-ALIAS-NAME>]

Use this option to configure the ESL server‘s IP address

  • <IP> – Provide the IP address

  • <HOST-ALIAS-NAME> – Provide a host alias name. Note, if using this option, ensure that the host alias is existing and pointing to the ESL server host.

port <1-65535>

Optional. Configures the port on which the ESL server can be reached.

  • <1-65535> – Specify the port from 1 - 65535.

Examples

NOC-NX9500(config-iot-device-type-imagotag-policy-test)#server ip-address 
10.234.160.225
NOC-NX9500(config-iot-device-type-imagotag-policy-test)#show context
 iot-device-type-imagotag-policy test
  enable
  output-power Level-B
  window-size 12
  payload-size 25
  ssl
  fcc-mode
  channel 9
  server ip-address 10.234.160.225
NOC-NX9500(config-iot-device-type-imagotag-policy-test)#

Related Commands

no (iot-device-type-imagotag-policy)

Removes the ESL server‘s hostname or IP address configuration
9036316-02 REV AB