evaluate-always
Sets flag to run this auto-provisioning policy every time an
access point is adopted. The access point‘s previous adoption status is not taken into
consideration.
Supported in the following platforms:
- Access Points — AP7502, AP7522,
AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
- Wireless Controller — RFS4010
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Examples
rfs4000-229D58(config-auto-provisioning-policy-test)#evaluate-always
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
default-adoption
evaluate-always
deny ap8432 precedence 1 mac 74-67-F7-07-02-35
deny ap8432 precedence 2 ip 192.168.13.24 102.168.13.26
adopt ap8432 precedence 5 profile default-ap8432 rf-domain TechPubs vlan 1
rfs4000-229D58(config-auto-provisioning-policy-test)#
Related Commands
| no |
Disables the running of this policy every time an
AP is adopted |
