ap7532

Adds an AP7532 to the network. If a profile for the AP is not available, a new profile is created.

Supported in the following platforms:

Access Point — AP7522, AP8432, AP8533
Wireless Controllers — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

ap7532 <MAC>

Parameters

ap7532 <MAC>


<MAC>	Specify the AP7532's MAC address.

Examples

rfs4000-6DB5D4(config)#ap7532 00-23-68-12-B6-18
rfs4000-6DB5D4(config-device-00-23-68-12-B6-18)#show context
ap7532 00-23-68-12-B6-18
 use profile default-ap7532
 use rf-domain default
 hostname ap7532-12B618
 mint mlcp vlan
 mint mlcp ip
 use radius-server-policy eap
 interface radio1
  rf-mode 2.4GHz-wlan
  wlan open bss 1 primary
 interface radio2
  rf-mode 5GHz-wlan
  wlan open bss 1 primary
rfs4000-6DB5D4(config-device-00-23-68-12-B6-18)#

rfs4000-6DB5D4(config)#show wireless ap configured
------------------------------------------------------------------------------------------
 IDX       NAME           MAC             PROFILE      RF-DOMAIN       ADOPTED-BY
------------------------------------------------------------------------------------------
1 ap7502-99BFA8   00-23-68-99-BF-A8   default-ap7502   default     00-15-70-6D-B5-D4
2 ap7532-12B618   00-23-68-12-B6-18   default-ap7532   default     00-15-70-6D-B5-D4
------------------------------------------------------------------------------------------
rfs4000-6DB5D4(config)#

Related Commands


no (global-config-mode)	Removes an AP7532 from the network