Controller, Service Platform and Access Point CLI Reference Guide

Changes the next boot partition or image on a specified device or on the logged device. The WiNG devices have two partitions: primary and secondary, with each partition containing an image of the operating system. Whenever the device boots up it loads the image from the partition specified here.

The partition currently in control of the boot process is the active partition, the other partition is the inactive partition with the alternate image. Use this command to manually change the next boot partition or image.

Supported in the following platforms:

Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
Wireless Controller — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

boot system [active|inactive|primary|secondary] {on <DEVICE-NAME>}

Parameters

boot system [active|inactive|primary|secondary] {on <DEVICE-NAME>}


system [active\|inactive\|primary\|secondary]	Specifies the image used by the device to boot up active – Changes the next boot image to the current, running (active) image inactive – Changes the next boot image to the current, inactive image primary – Changes the next boot partition to the primary partition. secondary – Changes the next boot partition to the secondary partition. Note: You will need to reload the device in order for the change to take effect.
on <DEVICE-NAME>	Optional. Changes the next boot image or partition on a specified device <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform. Note: If no device is specified, the logged device's next boot-up configuration is changed.

Examples

nx9500-6C8809#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       08/07/2019 06:09:06     08/12/2019 20:14:42     5.9.6.0-004D
  Secondary     07/31/2019 18:44:43     08/06/2019 12:04:14     5.9.6.0-003D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Primary
Software Fallback  : Enabled
VM support         : Not present
nx9500-6C8809#

nx9500-6C8809#boot system secondary
Updated system boot partition
nx9500-6C8809#

nx9500-6C8809#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       08/07/2019 06:09:06     08/12/2019 20:14:42     5.9.6.0-004D
  Secondary     07/31/2019 18:44:43     08/06/2019 12:04:14     5.9.6.0-003D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Secondary
Software Fallback  : Enabled
VM support         : Not present
nx9500-6C8809#

nx9500-6C8809#show boot on ap7562-84A224
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       07/31/2019 18:14:31     08/06/2019 13:22:20     5.9.6.0-003D
  Secondary     05/25/2019 06:43:28     06/03/2019 15:23:42     5.9.5.0-004D
--------------------------------------------------------------------------------
Current Boot       : Primary
Next Boot          : Primary
Software Fallback  : Enabled
VM support         : Not present
nx9500-6C8809#