route-map
Creates a dynamic Border Gateway
Protocol (BGP) route map and enters its configuration modeBGP route maps are used
by network administrators to define rules controlling redistribution of routes between
routers and routing processes. These route maps are also used to control and modify routing
information.
Supported in the following platforms:
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
route-map <ROUTE-MAP-NAME>
Parameters
route-map <ROUTE-MAP-NAME>
| route-map <ROUTE-MAP-NAME> |
Creates a new BGP route map and enters its configuration
mode |
Examples
nx9500-6C8809(config)#route-map test
nx9500-6C8809(config-dr-route-map-test)#?
Route Map Mode commands:
deny Add a deny route map rule to deny set operations
no Negate a command or set its defaults
permit Add a permit route map rule to permit set operations
clrscr Clears the display screen
commit Commit all changes made in this session
do Run commands from Exec mode
end End current mode and change to EXEC mode
exit End current mode and down to previous mode
help Description of the interactive help system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or terminal
nx9500-6C8809(config-dr-route-map-test)#
