cdp
Supported in the following platforms:
- Access Points — AP7502, AP7522,
AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
- Wireless Controller — RFS4010
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Parameters
cdp [receive|transmit]
| receive |
Enables CDP
packet snooping on this interface. When enabled, the port receives periodic
interface updates from a multicast address. This option is enabled by
default. |
| transmit |
Enables CDP
packet transmission on this interface. When enabled, the port sends out
periodic interface updates to a multicast address to advertise its presence
to neighbors. This option is enabled by default. |
Example
nx9500-6C8809(config-profile-default-rfs4000-if-ge1)#cdp transmit
Related Commands
| no |
Disables CDP packet snooping on the controller or service platform‘s selected GE ports |
