interface-config-radio-instance
Enables access point to change its channel of operation in order to terminate rogue devices. The radio should be configured to provide WLAN service.
This option is enabled by default.
wips airtime-termination allow-channel-change
wips airtime-termination allow-channel-change
| wips airtime-termination allow-channel-change | Enables access point to change its channel of operation (to that of the rogue device) in order to terminate the rogue device |
nx9500-6C8809(config-profile-testAP8163-if-radio1)#wips air-termination allow-channel-change
| no (radio-interface-config-command) | Disables access point to change its channel of operation in order to terminate rogue devices |