traceroute (user-privi-exec-mode)

Traces the route to a defined destination

Use ‘--help' or ‘-h' to display a complete list of parameters for the traceroute command

Note

This command and its syntax is common to both the User Executable and Privilege Executable configuration modes.

Supported in the following platforms:

Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
Wireless Controller — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

traceroute <LINE>

Parameters

traceroute <LINE>


traceroute <LINE>	Traces the route to a destination IP address or hostname <LINE> – Specify the destination IPv4 address or hostname.

Examples

NOC-NX9500>traceroute 10.234.160.13
traceroute to 10.234.160.13 (10.234.160.13), 30 hops max, 46 byte packets
 1  10.234.160.13 (10.234.160.13)  0.315 ms  0.159 ms  0.137 ms
NOC-NX9500>