clrscr

Clears the screen and refreshes the prompt, irrespective of the mode

Supported in the following platforms:

Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
Wireless Controller — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

clrscr

Parameters

None

Examples

The following example shows the terminal window or screen before the clrscr command is executed:

rfs4000-229D58#device-upgrade ?
  DEVICE-NAME     Name/MAC address of device
  all             Upgrade all devices
  ap650           Upgrade AP650 Device
  ap6522          Upgrade AP6522 Device
  ap6532          Upgrade AP6532 Device
  ap6562          Upgrade AP6562 Device
  ap71xx          Upgrade AP7161 Device
  ap7502          Upgrade AP7502 Device
  ap7522          Upgrade AP7522 Device
  ap7532          Upgrade AP7532 Device
  ap7562          Upgrade AP7562 Device
  ap81xx          Upgrade AP8163 Device
  ap8432          Upgrade AP8432 Device
  ap8533          Upgrade AP8533 Device
  cancel-upgrade  Cancel upgrading the device
  load-image      Load the device images to controller for device-upgrades
  rf-domain       Upgrade all devices belonging to an RF Domain
  rfs4000         Upgrade RFS4010 Device

rfs4000-229D58#

The terminal window or screen after the clrscr command is executed:

rfs4000-229D58#