ap7562

Adds an AP7562 series to the network. If a profile for the AP is not available, a new profile is created.

Supported in the following platforms:

Access Point — AP7562, AP8432, AP8533
Wireless Controllers — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

ap7562 <MAC>

Parameters

ap7562 <MAC>


<MAC>	Specify the AP7562's MAC address.

Examples

rfs4000-6DB5D4(config)#ap7562 01-16-71-A1-CD-20
rfs4000-6DB5D4(config-device-01-16-71-A1-CD-20)#show context
ap7562 01-16-71-A1-CD-20
 use profile default-ap7562
 use rf-domain default
 hostname ap7562-A1CD20
 mint mlcp vlan
 mint mlcp ip
 use radius-server-policy eap
 interface radio1
  rf-mode 2.4GHz-wlan
  wlan open bss 1 primary
 interface radio2
  rf-mode 5GHz-wlan
  wlan open bss 1 primary
rfs4000-6DB5D4(config-device-01-16-71-A1-CD-20)#

rfs4000-6DB5D4(config)#show wireless ap configured
------------------------------------------------------------------------------------------
 IDX     NAME          MAC             PROFILE       RF-DOMAIN       ADOPTED-BY
------------------------------------------------------------------------------------------
1  ap7502-99BFA8    00-23-68-99-BF-A8   default-ap7502   default     00-15-70-6D-B5-D4
2  ap7532-12B618    00-23-68-12-B6-18   default-ap7532   default     00-15-70-6D-B5-D4
3  ap7562-A1CD20    01-16-71-A1-CD-20   default-ap7562   default     00-15-70-6D-B5-D4
------------------------------------------------------------------------------------------
rfs4000-6DB5D4(config)#

Related Commands


no (global-config-mode)	Removes an AP7562 from the network