broadcast-dhcp

Configures broadcast DHCP packet handling parameters

Supported in the following platforms:

Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
Wireless Controller — RFS4010
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

broadcast-dhcp validate-offer

Parameters

broadcast-dhcp validate-offer


validate-offer	Enables validation of the broadcast DHCP packet destination (a wireless client associated to the radio) before forwarding over the air. This option is disabled by default.

Examples

nx9500-6C8809(config-wlan-test)#broadcast-dhcp validate-offer

nx9500-6C8809(config-wlan-test)#show context
wlan test
 ssid test
 bridging-mode local
 encryption-type none
 authentication-type eap
 accounting syslog host 172.16.10.4 port 2
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
broadcast-dhcp validate-offer
nx9500-6C8809(config-wlan-test)#

Related Commands


no (wlan-config-mode)	Disables validation of the broadcast DHCP packet destination (a wireless client associated to the radio) before forwarding over the air