Configures the local network IP addresses and masks. These network addresses are broadcasted to neighboring BGP peers. You can configure a single IP address or a range of IP addresses in the A.B.C.D/M notation.
Wireless Controllers — RFS 4000
Service Platforms — NX 95XX, NX 96XX
network <IP/M> {backdoor|pathlimit|route-map}
network <IP/M> {backdoor pathlimit <1-255>}
network <IP/M> {pathlimit <1-255>}
network <IP/M> {route-map <ROUTE-MAP-NAME>}
network <IP/M> {backdoor pathlimit <1-255>|pathlimit <1-255>|route-map <ROUTE-MAP-NAME>}
| network <IP/M> | Configures the local network‘s address in the A.B.C.D/M
format
|
| backdoor pathlimit <1-255> | Optional. Configures a BGP backdoor route. After
configuring the backdoor route, you can optionally configure the as-path hop count
limit attribute for this backdoor route.
|
| pathlimit <1-255> | Optional. Configures the maximum path limit for this AS
|
| route-map <ROUTE-MAP-NAME> | Optional. Associates a BGP route map with this local
network. When applied, the route-map values take precedence
|
nx9500-6C8809(config-profile testNX9000-router-bgp)#network 192.168.13.0/24 backdoor pathlimit 200
nx9500-6C8809(config-profile testNX9000-router-bgp)#show context router bgp bgp enable asn 1 aggregate-address 116.117.118.0/24 as-set summary-only distance bgp 200 100 200 bgp neighbor 192.168.13.99 remote-as 199 maximum-prefix 9999 80 restart 50 network 1.2.3.0/24 network 192.168.13.0/24 backdoor pathlimit 200 bgp-route-limit num-routes 10 nx9500-6C8809(config-profile testNX9000-router-bgp)#
| no (bgp-router-config) | Removes the list of local networks configured |