controller-assisted-mobility
Enables controller or service platform assisted mobility to
determine a wireless client‘s VLAN assignment. When enabled, a controller or service
platform‘s mobility database is used to assist in roaming between RF Domains. This option
is disabled by default.
Supported in the following platforms:
- Access Points — AP7502, AP7522,
AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
- Wireless Controller — RFS4010
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Syntax
controller-assisted-mobility
Examples
rfs4000-229D58(config-wlan-test)#controller-assisted-mobility
rfs4000-229D58(config-wlan-test)#show context
wlan test
ssid test
bridging-mode tunnel
encryption-type none
authentication-type none
controller-assisted-mobility
rfs4000-229D58(config-wlan-test)#
Related Commands
| no (wlan-config-mode) |
Disables controller or service platform assisted mobility to determine a
wireless client‘s VLAN assignment |
