enable

Turns on (enables) the privileged mode command set. The prompt changes from nx9500-6C8809> to nx9500-6C8809#. This command does not do anything in the Privilege Executable mode.

Supported in the following platforms:

• Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
• Wireless Controller — RFS4010
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

enable

Parameters

None

Examples

nx9500-6C8809>enable
nx9500-6C8809#