meshpoint

Maps an existing meshpoint to this radio

Use this command to assign each WLAN its own BSSID. If using a single-radio access point, there are 8 BSSIDs available. If using a dual-radio access point there are 8 BSSIDs for the 802.11b/g/n radio and 8 BSSIDs for the 802.11a/n radio.

Supported in the following platforms:

Access Points — AP7502, AP7522, AP7532, AP7562, AP8163, AP8432, AP8533

Syntax

meshpoint <MESHPOINT-NAME> {bss <1-16>}

Parameters

meshpoint <MESHPOINT-NAME> {bss <1-16>}


meshpoint <MESHPOINT-NAME>	Maps a meshpoint to this radio. Specify the meshpoint name.
bss <1-16>	Optional. Specifies the radio‘s BSS where this meshpoint is mapped <1-16> – Specify the BSS number from 1 - 16.

Example

nx9500-6C8809(config-profile-ap71xxTest-if-radio1)#meshpoint test bss 7
nx9500-6C8809(config-profile-ap71xxTest-if-radio1)#show context
 interface radio1
  meshpoint test bss 7
nx9500-6C8809(config-profile-ap71xxTest-radio1)#

Related Commands


no (radio-interface-config-command)	Disables meshpoint on the selected radio