Clear Routing Information Protocol next generation (RIPng) information for IPv6 interface.
clear ipv6 rip stats
clear ipv6 rip stats gigabitethernet {slot/port[/sub-port]}
clear ipv6 rip stats vlan <1-4059>
Clears IPv6 RIPng statistics for brouter.
Identifies a single slot and port. If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
Clears IPv6 RIPng statistics for VLAN.
Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
None
Priviledged EXEC