Show ExtremeCloud IQ Agent status information.
show application iqagent status
None
User EXEC
This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.
The show application iqagent status command displays the following information:
|
Output |
Description |
|---|---|
|
Connection Status |
Shows if ExtremeCloud IQ and IQ Agent are connected. Different fields appear in the show application iqagent status output, depending on the connection status. If IQ Agent is disabled, the connection status also displays as Disconnected. |
|
Last Onboard Time |
Shows the Last Onboard Time for the feature. |
|
Agent Version |
Shows the IQ Agent version running on the device. |
|
Association URL |
Shows the Association URL of the feature. |
|
Poll URL |
Shows the poll URL of the feature. |
|
Monitor Frequency |
Shows the monitor frequency of the feature. |
|
Poll Frequency |
Shows the poll frequency of the feature. |
|
Last Poll Status |
Shows the last poll status of the feature. |
|
Last Poll Success Time |
Shows the last poll success time of the feature. |
|
Last Health Status |
Shows the last health status of the feature. |
|
Last Health Success Time |
Shows the last health success time of the feature. |
|
Last Monitor Status |
Shows the last monitor status of the feature. |
|
Last Monitor Success Time |
Shows the last monitor success time of the feature. |
|
Time Disconnected |
Shows when IQ Agent disconnected from ExtremeCloud IQ. This status is not valid unless IQ Agent is enabled and in a disconnected state. |
|
Association Frequency |
Shows the frequency at which IQ Agent attempts to associate with ExtremeCloud IQ. Fast mode indicates an attempt every 40 seconds. Slow mode indicates an attempt every hour. For the first 24 hours of disconnection, the mode is Fast mode. The mode then changes to slow and remains in slow mode until successfully connected. This status is not valid unless IQ Agent is enabled and in a disconnected state. When you first onboard a device to ExtremeCloud IQ, it does not connect to the device immediately; it waits until the device attempts association again, which can take up to 1 hour. |
|
Previous Association Attempt |
Shows the last time IQ Agent attempted to associate with ExtremeCloud IQ. This status is not valid unless IQ Agent is enabled and in a disconnected state. |
|
Next Association Attempt |
Shows the next time IQ Agent will attempt to associate with ExtremeCloud IQ. This field displays In progress if IQ Agent is currently attempting to associate. This status is not valid unless IQ Agent is enabled and in a disconnected state. |
The following output shows an example of an IQ Agent that is enabled with a successful connection to ExtremeCloud IQ.
Switch:1>show application iqagent status
================================================================================
IQAgent Status
================================================================================
Connection Status : Connected
Last Onboard Time : 18:54:23 11 27 2019 UTC
Agent Version : 0.2.7
Association URL : https://10.16.231.98/hac-webapp/rest/v1/association
Poll URL : https://10.16.231.98/hac-webapp/rest/v1/poll/1904Q-20028
Monitor Frequency : 600
Poll Frequency : 30
Last Poll Status : SUCCESS
Last Poll Success Time : 14:39:16 11 28 2019 UTC
Last Health Status : SUCCESS
Last Health Success Time : 14:38:35 11 28 2019 UTC
Last Monitor Status : SUCCESS
Last Monitor Success Time : 14:38:35 11 28 2019 UTC
The following output shows an example of an IQ Agent that is enabled but not connected to ExtremeCloud IQ.
Switch:1>show application iqagent status
================================================================================
IQAgent Status
================================================================================
Connection Status : Disconnected
Time Disconnected : 19:22:33 08 25 2022 UTC
Association Frequency : Slow
Previous Association Attempt : 19:04:06 08 29 2022 UTC
Next Association Attempt : 20:04:43 08 29 2022 UTC