show radius dynamic-server

Display configuration or statistical information about RADIUS dynamic session clients.

Syntax

show radius dynamic-server client WORD<0-46>
show radius dynamic-server statistics

Command Parameters

statistics: Display statistics for RADIUS Dynamic Authorization clients.
WORD<0-46>: Specifies the client IPv4 or IPv6 address.

Default

None

Command Mode

User EXEC

Examples

The show radius dynamic-server command displays the following information:

Switch:1#show radius dynamic-server 

==========================================================================================
                        RADIUS Dynamic Authorization General Info
==========================================================================================
CLIENT                                   UDP        CLIENT     SECRET
ADDRESS                                  PORT       ENABLED    KEY
------------------------------------------------------------------------------------------
192.0.2.15                               1026       Disabled   ****************
192.0.2.16                               1027       Disabled   ****************
------------------------------------------------------------------------------------------

All 2 out of 2 Total Num of RADIUS Dynamic Authorization clients displayed

The following output displays dynamic server statistics:

Switch:1#show radius dynamic-server statistics

================================================================================
                 RADIUS Dynamic Authorization Global Statistics
================================================================================
Disconnects From Invalid Client Addresses:     0
CoAs From Invalid Client Addresses:            0
--------------------------------------------------------------------------------