Boots the switch with a factory default configuration.
Equivalent to a switch that ships from the factory. The switch has no configuration files, default user accounts, default security mode, Auto-sense-enabled ports, removes license files, and performs a ZTP+ configuration after reboot. The 30-day factory license is also reset.
Note
You can also use the unconfigure switch command to achieve the same behavior.
boot config flags factorydefaults reset-all-files
no boot config flags factorydefaults
The default is disabled.
Global Configuration
This flag resets to the default value after the CPU restarts. If you change this flag, you must restart the switch.
This command does not apply to all hardware platforms. For more information about feature support, see VOSS User Guide.