show ip dhcp-relay fwd-path

Display information about Dynamic Host Configuration Protocol (DHCP) relay forward paths.

Syntax

show ip dhcp-relay fwd-path
show ip dhcp-relay fwd-path [vrf WORD<1-16>]
show ip dhcp-relay fwd-path [vrf WORD<1-16>] [vrfids WORD<0-512>]
show ip dhcp-relay fwd-path [vrfids WORD<0-512>]

Command Parameters

vrf WORD<1-16>: Specifies the name of the VRF.
vrfids <0-512>: Specifies the ID of the VRF. The value is an integer in the range of 0 to 512.

Default

None.

Command Mode

User EXEC

Command Output

The show ip dhcp-relay fwd-path command displays the following information:


Output field	Description
INTERFACE	Shows the VLAN or port associated with the respective relay interface.
SERVER	Specifies the server address.
ENABLE	Specifies if the DHCP-relay forwarding path from the client to the server is enabled on the switch.
MODE	Indicates the configured mode of this interface.
SRC PORT 67	Specifies that the UDP source port is 67 for BOOTP/DHCP relay request. The default is 68.

Example

The following example displays information about DHCP Relay forward paths.

Switch:1> show ip dhcp-relay fwd-path 

============================================================================
                          DHCP Fwd-path - GlobalRouter
============================================================================
INTERFACE       SERVER           ENABLE    MODE            SRC PORT 67
----------------------------------------------------------------------------
3.3.3.3         4.4.4.1          FALSE    DHCP & BOOTP      TRUE