Display the current Extensible Authentication Protocol (EAPoL) configuration on the switch.
show eapol system
None
User EXEC
The show eapol system command displays the following information:
|
Output field |
Description |
|---|---|
|
eap |
Displays whether system authentication control is enabled. EAP is disabled by default. |
|
Eapol Version |
Displays the EAP version on the switch. |
|
non-eap-pwd-fmt |
Displays the password attribute format for non EAP RADIUS authentication. |
|
non-eap-pwd-fmt key |
Displays the attribute key string for non EAP RADIUS password. The range is 0– 32 characters. |
|
non-eap-pwd-fmt padding |
Displays whether the padding option is enabled or disabled. |
|
auto-isid-offset status Note:
Exception: Not supported on VSP 4450 Series or XA1400 Series. |
Displays the status of the Auto I-SID Offset feature. |
|
auto-isid-offset value Note:
Exception: Not supported on VSP 4450 Series or XA1400 Series. |
Displays the Auto I-SID Offset value. The range is 0-15995903. |
The following examples display the EAPol configuration on the switch.
Switch:1>show eapol system
==========================================================================================
Eapol System
==========================================================================================
eap : enabled
Eapol Version : 3
non-eap-pwd-fmt : mac-addr
non-eap-pwd-fmt key : ******
non-eap-pwd-fmt padding : disabled
auto-isid-offset status : disabled
auto-isid-offset value : 15980000
Switch:1>show eapol system
================================================================================
Eapol System
================================================================================
eap : disabled
Eapol Version : 3
non-eap-pwd-fmt : mac-addr
non-eap-pwd-fmt key : ******
non-eap-pwd-fmt padding : disabled
auto-isid-offset status : disabled
auto-isid-offset value : 1000