link-state group

Configures the Link-state tracking (LST) group.

Syntax

Command Parameters

<1-48>
Specifies the link-state group ID.
downstream
Specifies a downstream interface for the LST group.
enable
Enables the command.
interface gigabitEthernet {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}
Specifies the slot and port for the upstream or downstream LST group.

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

mlt <1-512>
Specifies an MLT ID for the upstream or downstream LST group.
upstream
Specifies an upstream interface for the LST group.

Default

None

Command Mode

Global Configuration