auto-recover-port

Syntax

• auto-recover-port

• auto-recover-port enable

• auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

• default auto-recover-port

• default auto-recover-port enable

• default auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• default auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

• no auto-recover-port

• no auto-recover-port enable

• no auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• no auto-recover-port port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

Command Parameters

enable

Enables spoof detection on the port.

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration